dmesg - AMD FX-8150 Eight-Core
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-22-generic (buildd@allspice) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #22-Ubuntu SMP Tue Jun 16 17:15:15 UTC 2015 (Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1)
Command line: BOOT_IMAGE=/vmlinuz-3.19.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00cff00000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfd9ffff] usable
BIOS-e820: [mem 0x00000000cfda0000-0x00000000cfdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfdd1000-0x00000000cfdfffff] ACPI data
BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD3/GA-990FXA-UD3, BIOS F8 05/30/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000042f000000 aka 17136M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
total RAM covered: 3326M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4c20-0x000f4c2f] mapped at [ffff8800000f4c20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x42ee00000-0x42effffff]
[mem 0x42ee00000-0x42effffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x42edfffff]
[mem 0x420000000-0x42edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfd9ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfd9ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35666000-0x36b2afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6B40 000014 (v00 GBT )
ACPI: RSDT 0x00000000CFDD1000 00004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CFDD1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CFDD1100 007997 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000CFDA0000 000040
ACPI: MSDM 0x00000000CFDD8B80 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000CFDD8C00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CFDD8C40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000CFDD8CC0 000740 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000CFDD9400 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000CFDD9470 000182 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000CFDD8AC0 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0x00000000CFDD9600 00648F (v01 MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 0x00000000CFDDFB00 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
NODE_DATA(0) allocated [mem 0x42eff9000-0x42effdfff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e600000-ffff88042e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcfd9ffff]
node 0: [mem 0x100000000-0x42effffff]
Initmem setup node 0 [mem 0x00001000-0x42effffff]
On node 0 totalpages: 4189502
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13239 pages used for memmap
DMA32 zone: 847264 pages, LIFO batch:31
Normal zone: 52160 pages used for memmap
Normal zone: 3338240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfda0000-0xcfdd0fff]
PM: Registered nosave memory: [mem 0xcfdd1000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88042ec00000 s87040 r8192 d31744 u262144
pcpu-alloc: s87040 r8192 d31744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4124018
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 16325356K/16758008K available (8001K kernel code, 1232K rwdata, 3752K rodata, 1408K init, 1300K bss, 432652K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3624.071 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7248.14 BogoMIPS (lpj=14496284)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30088 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57985.13 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcfda0000-0xcfdd0fff] (200704 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:56:13, date: 07/15/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:679a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfdc80000-0xfdcbffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b4b:917a] type 00 class 0x01018f
pci 0000:02:00.0: reg 0x10: [io 0xdf00-0xdf07]
pci 0000:02:00.0: reg 0x14: [io 0xde00-0xde03]
pci 0000:02:00.0: reg 0x18: [io 0xdd00-0xdd07]
pci 0000:02:00.0: reg 0x1c: [io 0xdc00-0xdc03]
pci 0000:02:00.0: reg 0x20: [io 0xdb00-0xdb0f]
pci 0000:02:00.0: reg 0x24: [mem 0xfd3ff000-0xfd3ff1ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:0a.0: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
pci 0000:03:06.0: [1814:0601] type 00 class 0x028000
pci 0000:03:06.0: reg 0x10: [mem 0xfdee0000-0xfdeeffff]
pci 0000:03:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:03:0e.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:03:0e.0: reg 0x14: [io 0xcf00-0xcf7f]
pci 0000:03:0e.0: supports D2
pci 0000:03:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfd9f8000-0xfd9fffff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 05]
pci 0000:00:15.1: bridge window [io 0xa000-0xafff]
pci 0000:00:15.1: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 06]
pci 0000:00:15.2: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.2: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:15.2: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0x8e00-0x8eff]
pci 0000:07:00.0: reg 0x18: [mem 0xfd4ff000-0xfd4fffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [mem 0xfd4f8000-0xfd4fbfff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 07]
pci 0000:00:15.3: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.3: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.3: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfda0000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:01: [io 0x0900-0x091f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x08fe] could not be reserved
system 00:01: [io 0x0a10-0x0a17] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x000d1000-0x000d3fff] has been reserved
system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:06: [mem 0xcfda0000-0xcfdfffff] could not be reserved
system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x00100000-0xcfd9ffff] could not be reserved
system 00:06: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfd300000-0xfd30ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:0a.0: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 05]
pci 0000:00:15.1: bridge window [io 0xa000-0xafff]
pci 0000:00:15.1: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 06]
pci 0000:00:15.2: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.2: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:15.2: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 07]
pci 0000:00:15.3: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.3: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.3: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfd300000-0xfd3fffff]
pci_bus 0000:02: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:03: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21268K (ffff880035666000 - ffff880036b2b000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06000626
microcode: CPU1: patch_level=0x06000626
microcode: CPU2: patch_level=0x06000626
microcode: CPU3: patch_level=0x06000626
microcode: CPU4: patch_level=0x06000626
microcode: CPU5: patch_level=0x06000626
microcode: CPU6: patch_level=0x06000626
microcode: CPU7: patch_level=0x06000626
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1436968573.824:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-22-generic xhci-hcd
usb usb1: SerialNumber: 0000:05:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-22-generic xhci-hcd
usb usb2: SerialNumber: 0000:05:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-22-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:12.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-22-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.0-22-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.19.0-22-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.19.0-22-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.19.0-22-generic ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 3.19.0-22-generic ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c7d440344c0b3ac2a3cec2aeb9722ecf6cae7391'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:402:938
rtc_cmos 00:02: setting system clock to 2015-07-15 13:56:14 UTC (1436968574)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 180K (ffff8800017d3000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
random: systemd-udevd urandom read with 7 bits of entropy available
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfd3ff000 port 0xfd3ff100 irq 25
ata8: SATA max UDMA/133 abar m512@0xfd3ff000 port 0xfd3ff180 irq 25
r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011ba8000, 00:13:3b:10:99:12, XID 0c900800 IRQ 26
r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 6-4: new low-speed USB device number 2 using ohci-pci
usb 7-2: new full-speed USB device number 2 using ohci-pci
ata7: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 6-4: New USB device found, idVendor=047b, idProduct=0011
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4: Product: Standard USB Keyboard
usb 6-4: Manufacturer: Silitek
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-4/6-4:1.0/0003:047B:0011.0001/input/input5
hid-generic 0003:047B:0011.0001: input,hidraw0: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:12.0-4/input0
usb 7-2: New USB device found, idVendor=04e6, idProduct=e001
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 7-2: Product: SCRx31 USB Smart Card Reader
usb 7-2: Manufacturer: SCM Microsystems Inc.
usb 7-2: SerialNumber: 60505DED
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
firewire_core 0000:03:0e.0: created device fw0: GUID 0049e55034d10900, S400
tsc: Refined TSC clocksource calibration: 3624.186 MHz
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
Switched to clocksource tsc
floppy0: no floppy controllers found
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Nameserver information manager.
lp: driver loaded but no devices found
systemd[1]: Started udev Coldplug all Devices.
ppdev: user-space parallel port driver
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Started Journal Service.
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
cfg80211: Calling CRDA to update world regulatory domain
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
kvm: disabled by bios
fglrx: module verification failed: signature and/or required key missing - tainting kernel
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x1e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
Adding 16760828k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:16760828k SSFS
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0002 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[fglrx] Maximum main memory to use for locked dma buffers: 15655 MBytes.
[fglrx] vendor: 1002 device: 679a revision: 0 count: 1
[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors
floppy0: no floppy controllers found
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[318]: Received request to flush runtime journal from PID 1
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
audit: type=1400 audit(1436968581.161:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.161:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.165:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.165:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.165:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.165:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.177:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.177:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.177:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1436968581.177:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=583 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
r8169 0000:07:00.0 eth0: link down
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
[fglrx] Firegl kernel thread PID: 888
[fglrx] Firegl kernel thread PID: 889
[fglrx] Firegl kernel thread PID: 890
[fglrx] IRQ 28 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:bfff3000, size:d000
usb 7-3: new full-speed USB device number 3 using ohci-pci
usb 7-3: New USB device found, idVendor=0781, idProduct=0002
usb 7-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 7-3: Product: ImageMate CompactFlash USB
usb 7-3: Manufacturer: SanDisk Corporation
usb 7-3: SerialNumber: 000000000003
usb-storage 7-3:1.0: USB Mass Storage device detected
usb-storage 7-3:1.0: Quirks match for vid 0781 pid 0002: 10
scsi host8: usb-storage 7-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
random: nonblocking pool is initialized
scsi 8:0:0:0: Direct-Access SanDisk ImageMate II 1.30 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
wlan0: authenticate with 84:1b:5e:85:a6:67
wlan0: send auth to 84:1b:5e:85:a6:67 (try 1/3)
wlan0: authenticated
wlan0: associate with 84:1b:5e:85:a6:67 (try 1/3)
wlan0: RX AssocResp from 84:1b:5e:85:a6:67 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 84:1b:5e:85:a6:67
wlan0: send auth to 84:1b:5e:85:a6:67 (try 1/3)
wlan0: send auth to 84:1b:5e:85:a6:67 (try 2/3)
wlan0: authenticated
wlan0: associate with 84:1b:5e:85:a6:67 (try 1/3)
wlan0: RX AssocResp from 84:1b:5e:85:a6:67 (capab=0x431 status=0 aid=1)
wlan0: associated